- When used with Festool guide rails (75 inch rail included), you can achieve perfectly straight and splinter-free cuts.
- Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
- Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
- MMC electronics provide soft start, variable speed, constant speed under load, and current and thermal overlad protection.
Cut as straight as a panel saw with the versatility of a portable saw. The Festool TS 75 EQ plunge saw has a multitude of uses, from fine carpentry to cutting spiral staircase steps; from rough timber to cutting out window frames in renovation work. The TS 75 is a larger saw with greater cut depth than the Festool TS 75 EQ. Portable circular saws often react unexpectedly. They wander off line and are subject to play in the guide. Its a quick way to ruin expensive material. But not the TS 75 EQ and included guide rail: the saw blade makes its cut absolutely straight and splinter-free. Perpendicular or even beveled, the choice is yours. As a plunge saw, it can start and end a cut accurately anywhere on the material. Equally important, on the TS 75 , the saw blade and riving knife retracts into the housing, unlike on conventional pendulum-cover saws, where the cover retracts instead of the blade. This automatically means greater intrinsic safety.A powerful saw that’s able to deliver pinpoint accuracy, the Festool TS 75 EQ Circular Saw is ideal for cutting solid doors, truing rough lumber, and cutting through stacks of sheet materials–among other applications. It features a slip clutch, variable-speed design, along with constant speed monitoring and a retractable spring-loaded riving knife for smooth, controlled operation. Plus, FastFix blade changes save time and keep your work flow smooth.
|Robust internals and system sensors allow the TS 75 EQ to safely maintain its speed during difficult cuts. View larger.|
|When used with guide rails, the saw offers a maximum cutting depth of 2-3/4 inches. View larger.|
|Adjustable guide jaws and on-board Allen key for quick blade changes. View larger.|
|The TS 75 EQ cuts right on the edge of the scribe line.|
|The spring-loaded riving knife gives you control.|
|FastFix Saw Blade Changing System for quick, safe blade changes.|
Quick, Controlled Plunge-Cutting Action
Festool’s most powerful plunge cut saw, the Festool TS 75 EQ is a versatile, heavy-duty saw that’s capable of creating clean edges in the face of tough applications. These burn-free, splinter-free edges are clean enough to glue without any further prep work, saving you time and effort. And for improved accuracy and reduced waste, the TS 75 EQ makes each cut right on the edge of the scribe line, even when you’re making bevel cuts.
The TS 75 EQ offers a maximum cutting depth of 2-15/16 inches (75 millimeters) when used without a guide rail, and it gives you 2-3/4 inches of cutting capacity when used with a guide rail. Plus, it makes depth adjustment simple by allowing you to expose only the part of the blade necessary for a given cut.
Clean Finishes with Guide Rail and Splinterguard
Built to work with Festool guide rails, the TS 75 EQ makes it easy to set up for perfectly straight cuts. Guide rail guidance also allows you to use limit stops to cut identical pieces. The saw comes with a versatile 75-inch guide rail.
In addition, an integral guide rail splinterguard and a second, detachable off-cut side splinterguard work to eliminate tear out on both sides of the saw’s cut line. A cut line that’s clean and splinter-free on both sides of the blade means you only need to make one pass with the saw, which saves you time. It also means you waste less material, which saves you money.
Spring-Loaded Riving Knife and Slip Clutch Reduce Kickback
The TS 75 EQ features a spring-loaded riving knife (splitter) that retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open, so the material you are working with does not pinch the saw blade. This reduces the chance of kickback, making the saw safer and ensuring complete control over each cut.
The saw also features a slip-clutch design that further reduces the potential for kickback, while also reducing wear on the blade, gear case, and motor for extended tool life.
FastFix Blade Changing System Saves Time
When it’s time to switch out the blade on your TS 75 EQ, the FastFix system makes the change fast, easy, and intuitive. When this system is engaged, the saw’s power switch and arbor are locked simultaneously, so you don’t have to worry about accidental start-ups. In addition, the saw is locked into a position that facilitates easy arbor bolt removal, so you can get at the blade quickly.
Robust Design Includes MMC Electronics
Different applications place different demands on your tools, and the TS 75 EQ offers variable speed control from 1,350 rpm to 3,550 rpm for equally good results when working with a variety of materials. With its constant speed monitoring, the saw is able to maintain consistent blade speeds under heavy loads, which produces clean, consistent results. And it guards against overheating and current overload, extending the life of the saw.
In addition, this plunge-cut saw features a Plug-It power cord. This interchangeable cord design allows you to quickly switch between Festool tools without changing your entire setup.
The Festool TS 75 EQ Circular Saw is backed by a three-year limited warranty and a 30-day money-back guarantee.
What’s in the Box
Festool TS 75 EQ Circular Saw, 75-inch (1900-millimeter) guide rail, 36-tooth blade, limit stop, Plug-it power cord, splinterguard, and Systainer storage case.
|Even in thick material, the TS 75 EQ creates burn-free, splinter-free edges that are clean enough to glue without prep work.|
List Price: $ 655.00